STREAM RING 20 WING
Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.
HYDRAULIC IMPACT WRENCH ID07
The ID07 is a high torque impact wrench used to adjust and loosen nuts and bolts. Apply a maximum impact torque of 675 Nm. Available with friction ring or bolt retainer sleeve.
STREAM RING 20 LITE WING
Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.
IW24 HYDRAULIC IMPACT WRENCH
Stanley hydraulic impact wrenches for underwater applications are designed to meet the most stringent requirements for underwater screwing. Their rugged design includes an integrated motor and a rugged mechanism for the tough demands of railroad maintenance. The weight ratio -The power of this equipment has no comparison with an impact wrench of this type on the market.
STREAM RING 20 WING COLORED
Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.
STREAM RING 20 WING STRIPE
Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.
TRIESTE WING 94 LB TWIN
The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.
PERFORMANCE WING 32 LB SINGLE
The Performance Mono Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other. It also has stabilizing bars built into the wing to reduce tank shifting during the dive. This is the ideal wing for the traveling diver as it is small, lightweight and easy to pack. The Mono wing will fit onto the IQ pac, Aluminum or Stainless Steel Backplate using the Comfort harness II or Continuous weave (Dir) harness.
THREE PHASE ELECTRIC CAVITATION CLEANING MACHINE
The underwater cavitation cleaning machine, powered by a three-phase 380v electric motor. Its quality / price ratio is really unbeatable. Power, reliability and lightness are its strengths.
PERFORMANCE WING 45 LB DOUBLE
SINGLE PHASE ELECTRIC MOTOR CAVITATION CLEANING...
The underwater cavitation cleaning machine is powered by a single phase electric motor, ideal for moderate work, where the convenience and accessibility of single phase electricity is a deciding factor.
TRIESTE WING 60 LB TWIN
DIESEL CAVITATION CLEANING MACHINE
This cavitation cleaning machine is equipped with a powerful 8 KW Yanmar diesel engine. Standard equipment includes the EVO 2 gun
WTX-D18 WING 8 L
GASOLINE CAVITATION CLEANING MACHINE
The cavitation cleaning machine is driven by a powerful and reliable 9.5 kW gasoline engine or Honda engine. Standard equipment includes the Evo2 pistol.
WTX-D30 WING 15 L
The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver
SUBMERSIBLE PUMP SM21
Las bombas hidráulicas Stanley exemplifies the potencia pura of las herramientas hidráulicas. Nuestra bomba SM50 descarga nada menos que 500 galones por minuto (1890 lpm) y su tamaño pequeño the permite adjustarse a una caja de 11 pulgadas de profundidad por 10 pulgadas cuadradas (26.7 cm x 25.4 cm).
SUBMERSIBLE PUMP SM50
Stanley hydraulic pumps exemplify the sheer power of hydraulic tools. Our SM50 pump discharges no less than 500 gallons per minute (1890 lpm) and its small size allows it to fit into a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm).
WASTE PUMP TP03
The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP03 pump provides a discharge capacity of 450 gallons per minute (1688 l / min) and can pump solids up to a diameter of 76 mm (3 in). The TP08 has a discharge capacity of 800 gpm (3028 lpm) and can pump solids up to 4 inches (102 mm) in diameter.
WASTE PUMP TP08
The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP03 pump provides a discharge capacity of 450 gallons per minute (1688 l / min) and can pump solids up to a diameter of 76 mm (3 in). The TP08 has a discharge capacity of 800 gpm (3028 lpm) and can pump solids up to 4 inches (102 mm) in diameter.
EVO-2 GUN CAVITCLEANER
Evo2 is the Cavitcleaner cavitation gun capable of removing any type of encrustation, from light encrustation to acorn shells and mussels. The Evo2 is easy to use, easy to use and among its strengths is safe use even for less experienced operators. It is available in several times: S, M, L. It is compatible with most high pressure machines.